DS3

12-Fret Slope Shoulder Dreadnought

DS3

12-Fret Slope Shoulder Dreadnought

Top Sitka spruce
Back & Sides E. Indian rosewood
Neck Honduran mahogany
Body Binding Ivoroid with b/w/b/w/b purfling
Fingerboard Binding .060" ivoroid
Peghead Binding .100" ivoroid with b/w purfling
Bridge Ebony belly-style with 2 3/8" spacing
Fingerboard Ebony with no inlay
Fingerboard Radius 14" - 26" compound
Bridge Pins/End Pin Ebony with abalone dot
Nut Bone, 1 13/16"
Saddle Bone, drop-in
Neck Profile Modified V
Peghead Profile Tapered slotted square with volute
Neck Joint Mortise & tenon hybrid
Truss Rod Fully adjustable
Frets Medium 18% nickel-silver
Peghead Veneer Stained Exotic Ebony with MOP Collings logo
Tuners Gold Waverly
Backstrip 3-style (Chevron)
Rosette Abalone
Scale Length 25 1/2"
Brace Material Sitka spruce
Brace Pattern Pre-war scalloped X-brace
Body Finish High gloss nitrocellulose lacquer
Neck Finish High gloss polyester resin
Pickguard Tortoise
Strings D'Addario EJ-17 (.013"- .056")
Case Deluxe hardshell case

This is the original 12-fret dreadnought shape, first designed as an oversized Hawaiian guitar almost a century ago. We’ve retained the shape and wide neck with slotted headstock from that bygone era, but our DS models are thoroughly modern guitars with a unique sound all their own.

The longer body with the bridge closer to the center of the lower bout delivers an open, airy tone with smoothness and warmth not typically found in modern 14-fret dreadnoughts. Whether flatpicked or played fingerstyle, these guitars have lots of headroom and the wide dynamic range invites everything from mellow accompaniment to biting leads.

DS1 vs DS2H vs DS3

While all three models share the same body dimensions, key differences are outlined below.

  • Our 1-style (DS1) features Honduran mahogany back and sides with tortoise body binding and butt wedge, b/w/b/w top purfling, a walnut backstrip, dot fingerboard inlays, and a simpler 1-style rosette.
  • Our 2-style (DS2H) features East Indian rosewood back and sides with ivoroid body binding and butt wedge, herringbone top purfling, a “zipper” backstrip, diamonds and squares fingerboard inlays, and a more intricate 2-style rosette.
  • Our 3-style (DS3) features East Indian rosewood back and sides with ivoroid body/fingerboard/peghead binding and butt wedge, no herringbone top purfling, a “chevron” backstrip, no fingerboard inlays, and an abalone rosette.

Custom Options

Top Options

  • Old-Growth Sitka spruce
  • Torrefied Sitka spruce
  • Adirondack spruce
  • European spruce
  • Honduran mahogany

Back & Sides Options

  • Walnut
  • Wenge
  • Maple
  • Koa
  • Cocobolo
  • Honduran mahogany

Peghead Inlay Options

  • Torch
  • Flowerpot
  • Vine
  • Flourish
  • Rose
  • Modern Diamond

Fingerboard Inlay Options

  • Diamonds & squares (long or short)
  • 42-style snowflakes
  • 45-style snowflakes
  • Tree of Life
  • Mom inlays
  • Modern diamonds

Binding Options

  • Tortoise binding
  • Maple binding
  • Koa binding
  • Rosewood binding

Trim Options

  • Herringbone trim
  • Rope purfling
  • 1-style backstrip
  • 2-style backstrip
  • 41-style abalone top border
  • 42-style abalone top border

Finish Options

  • Sunburst top
  • Western Shaded top
  • Jet Black finish
  • Satin neck finish
  • Dark Vintage sunburst

Design Options

  • Adirondack braces
  • Left-handed

Scale Length & Nut Width Options

  • 1 3/4" nut width

Neck / Profile Options

  • Solid peghead

Bridge & Saddle Options

  • Cutthrough saddle

Pickguard Options

  • Tortoise
  • Dalmatian
  • Tigerstripe
  • Pearloid
  • Ivoroid

Tuner Options

  • Gold Waverly
  • Ivoroid tuner buttons
  • Ebony tuner buttons

Ready to discuss your custom Collings order?

Find a Dealer